[ remote control operation ]

An LED light will blink intermittently during the course of the treatment.  The light turns off after 25 minutes indicating the device is off. 

Two programs (currently the same) are selectable by pressing the 1 and 2 keys (up arrow) on the remote. To stop a running program press the down arrow (1 or 2). When pressing the remote if the light does not come on the battery may need to be re-charged.   

Please see Battery Charger Instructions

If the MT still does not respond after charging the battery for a minimum of 15 minutes, then please see Remote Control Troubleshooting to determine if the battery in the remote control is good. If the keychain remote is pointed at a television, some infrared controlled models may respond by turning off or switching operating modes temporarily. It is recommended not to direct the remote at a television set.

 

[ Remote Control Troubleshooting ]

When program 1 or 2 keys are pressed (up or down) a red light should appear in the top left button of the remote. 

If there is no light then the battery may need replacement.

The remote uses a common battery 3V DL2025/CR2025. The battery is replaced by removing the circular cover plate on the back of the remote.